The Challenge of a New QTH

A decade ago, my wife and I spent four years in Floyd County in one of her church postings. We loved the area, and imagined we'd retire there.

In November we took the first step. Bought a house in Floyd County near Rome, GA. House is on the top of a small mountain - Ward Mountain, rising 300 feet above the valley floor below. From the front porch, there is a gorgeous view to the West. On a clear day we can see 35 miles to Lavender Mountain, which is practically in Alabama,

The house is a little smaller than we'd like at 2100 square feet, but there's over 11 acres of land. A small office outbuilding with one room and a tiny bathroom has become the ham shack.

We've owned the house in Gwinnett county for 30 years. Now we are transferring things to the new house. There's a lot to do. We'll sell the Gwinnett house in the next months. In the meantime, I'm focused on building up the Floyd QTH when I have the energy.

Antennas are the first order of business. I first put up an 80/40/20m Trap Dipole. It's up about 12m in the trees. I erected a 160m Inverted-L with two elevated radials. It's a bit noisy, so receiving antennas are likely needed to make the most of that. I plan for three beverage antennas. A 6m dipole barely 4m up in the trees offers me an option on that band.

I've also put together the HF4B. I've mounted it on a 19 foot pole lashed to a deck post. It needs adjustment to work well. It's OK on 10m, but 15 and 20m aren't quite right.

I'm planning to put up a tower. I'll need to take down the tower in Gwinnett first. My plan is 70 feet of Rohn 25, with the A3S/A743 on top. 35 feet below that will be an A3S, pointed at Europe. This would give me a stack toward Europe, plus coverage in other directions with the top antenna. Horizon is unobstructed in every direction except to the NorthEast, where the two additional summits of the Ward Mountain chain are. Those peaks are just 100 feet and 140 feet higher, but they are 1 km and 2 km away, respectively.

I'm already seeing good results with the 80/40/20m trap dipole. There are benefits to being on the top of a mountain. Even a simple tower should be awesome.

For 6m, I'm on the lookout for a 5-6 element beam. The Cushcraft A50-3S i've been using in Gwinnett just doesn't have enough gain to work the intercontinental paths. 

On the office building, I've already moved in an operating desk with desktop shelves, and another luncheon table that serves as a workbench. The main part of the floor is a little more than nine feet square, And almost six feet of the rest of the building is split between the tiny bathroom and the rest of the floor. The desk and workbench are a bit of a squeeze.

A wire shelving rack takes up some of the space opposite the tiny bathroom, and gives me room to store things. I don't know how I'm going to get a whole basement of ham gear into this little building.

Such is the challenge of a new QTH.